Phono cartridge Audio-Technica VM540ML
The standard polymer housing of the 500 series is equipped with the same two-coil generator as in the 700 series, a central permalloy screen and coils of 6N oxygen-free copper.
The Audio-Technica VM540ML pickup head is a VM-type pickup with a dual magnetic system and a highly efficient paratoroidal converter design.
V M cartridges from Audio-Technica are distinguished by a unique design. This design increases the efficiency of the movable system and ensures perfect contact of the needle tip with the recording groove. In addition, the VM540ML series cartridges use a paratoroidal converter design located inside the head housing, which allows you to eliminate any losses in sound information and obtain the highest efficiency of the converting system. The arrangement of a two-coil electromagnetic converter system, with a central shielding plate between the coils, allows for a wide and uniform frequency response and almost completely eliminates the interference of the coils of the right and left channels.
The Audio-Technica VM540ML pickup head is equipped with a Micro Line profile needle. The Microline needle profile provides even better reproduction of high frequencies, with less distortion and less wear than elliptical or conventional Line-contact profiles.
The coils of the Audio-Technica VM540ML pickup are wound with 6N-OFC copper - oxygen-free copper of a high degree of purification (99.99997%).
Features of Audio-Technica VM540ML:- Sharpening the MicroLine pickup needle
- Double magnetic system
- Paratoroidal converter design
- Aluminum Cantilever
- Permalloy insulating plate between stereo channels
- Durable anti-resonance polymer housing
The package includes: A brush for cleaning the needle, a special non-magnetic screwdriver for attaching the pickup, 4 screws (2 x 10 mm and 2 x 5 mm), 2 plastic washers and 2 nuts, a set of shell cables.
Specifications
- Device Type Phono cartridge
- Recommended load resistance 47 кОм
- Downforce range 1.8 - 2.2 г
- Recommended load capacity 100 - 200 пФ
- Optimal downforce 2.0 г
- Scope of delivery Щеточка для чистки иглы, специальная немагнитная отвертка для крепления звукоснимателя, 4 винта ( 2 х 10 мм и 2 х 5 мм), 2 пластиковые шайбы и 2 гаечки, комплект кабелей для шелла
- Channel separation 28 дБ
- Dynamic compliance 10 x 10-6 cm/din (100 Hz)
- Channel unbalance 1.0 дБ
- Static compliance 40 х 10-6 см / дин
- Tracking angle 23˚
- Type of needle sharpening Лайн контакт
- Output voltage 4.0 mV
- Cantilever material Алюминий
- Internal resistance 800 Ohms
- Height 17.3 mm
- Mounting type Standard (half-inch)
- Type of plate Stereo
- Brand name of the sharpening MicroLine
- Needle Type MM
- Needle sharpening radius 0.12 x 2.2 mil
- Frequency response 20 Гц - 27000 Гц
Dimensional parameters
- Weight 6.4 г
- Quantity is limited
- Product Code: ATVM540
- ATVM540
Reviews (0)
Related Products
Copyright © 2024 SoundsLife.art Partner AudioFeel