Phono cartridge Audio-Technica VM520EB
The standard polymer housing of the 500 series is equipped with the same two-coil generator as in the 700 series, a central permalloy screen and coils of 6N oxygen-free copper.
The Audio-Technica VM520EB pickup head is a VM-type pickup with a dual magnetic system and a highly efficient paratoroidal converter design.
V M cartridges from Audio-Technica are distinguished by a unique design. This design increases the efficiency of the movable system and ensures perfect contact of the needle tip with the recording groove. In addition, the VM520EB series cartridges use a paratoroidal converter design located inside the head housing, which allows you to eliminate any losses in sound information and obtain the highest efficiency of the converting system. The arrangement of a two-coil electromagnetic converter system, with a central shielding plate between the coils, allows for a wide and uniform frequency response and almost completely eliminates the interference of the coils of the right and left channels.
The Audio-Technica VM520EB pickup head is equipped with an elliptical profile needle. The Elliptical Bonded profile, compared to the conical one, provides a more precise following of the bends of the audio track, which gives a better frequency range, sphazing, and reduces distortion.
The coils of the Audio-Technica VM520EB pickup are wound with 6N-OFC copper - oxygen-free copper of a high degree of purification (99.99997%).
Features of Audio-Technica VM520EB:- Elliptical sharpening of the pickup needle
- Double magnetic system
- Paratoroidal converter design
- Aluminum Cantilever
- Permalloy insulating plate between stereo channels
- Durable anti-resonance polymer housing
The package includes: 4 screws (2 x 10 mm and 2 x 5 mm), 2 plastic washers and 2 nuts.
Specifications
- Device Type Phono cartridge
- Recommended load resistance 47 кОм
- Downforce range 1.8 - 2.2 г
- Recommended load capacity 100 - 200 пФ
- Optimal downforce 2.0 г
- Scope of delivery 4 винта ( 2 х 10 мм и 2 х 5 мм), 2 пластиковые шайбы и 2 гаечки
- Channel separation 27 дБ (1 кГц)
- Dynamic compliance 8 x 10-6 cm/din (100 Hz)
- Channel unbalance 1.5 дБ
- Static compliance 35 х 10-6 см / дин
- Tracking angle 23˚
- Type of needle sharpening Эллиптическая
- Output voltage 4.5 mV
- Cantilever material Алюминий
- Internal resistance 800 Ohms
- Height 17.3 mm
- Mounting type Standard (half-inch)
- Type of plate Stereo
- Brand name of the sharpening Elliptical Bonded
- Needle Type MM
- Needle sharpening radius 0.3 x 0.7 mil
- Housing material Пластик
- Frequency response 20 Гц - 23000 Гц
Dimensional parameters
- Weight 6.4 г
- Pre-Order
- Product Code: ATVM520
- ATVM520
Reviews (0)
Related Products
Copyright © 2024 SoundsLife.art Partner AudioFeel