Phono cartridge Audio-Technica VM510CB
The standard polymer housing of the 500 series is equipped with the same two-coil generator as in the 700 series, a central permalloy screen and coils of 6N oxygen-free copper.
The Audio-Technica VM510CB pickup head is a VM-type pickup with a dual magnetic system and a highly efficient paratoroidal converter design.
V M cartridges from Audio-Technica are distinguished by a unique design. This design increases the efficiency of the movable system and ensures perfect contact of the needle tip with the recording groove. In addition, the VM510CB series cartridges use a paratoroidal converter design located inside the head housing, which allows you to eliminate any losses in sound information and obtain the highest efficiency of the converting system. The arrangement of a two-coil electromagnetic converter system, with a central shielding plate between the coils, allows for a wide and uniform frequency response and almost completely eliminates the interference of the coils of the right and left channels.
The Audio-Technica VM510CB pickup head is equipped with a needle with a Conical Bonded profile. The advantage of the Conical Bonded profile is that even in case of wear, the tip of the needle provides precise contact with the groove and stable sound quality. For this quality, such needles were widely used on radio stations.
The coils of the Audio-Technica VM510CB pickup are wound with 6N-OFC copper - oxygen-free copper of a high degree of purification (99.99997%).
Features of Audio-Technica VM510CB:- Conical sharpening of the pickup needle
- Double magnetic system
- Paratoroidal converter design
- Aluminum Cantilever
- Permalloy insulating plate between stereo channels
- Durable anti-resonance polymer housing
The package includes: 4 screws (2 x 10 mm and 2 x 5 mm), 2 plastic washers and 2 nuts.
Specifications
- Device Type Phono cartridge
- Recommended load resistance 47 кОм
- Downforce range 1.8 - 2.2 г
- Recommended load capacity 100 - 200 пФ
- Optimal downforce 2.0 г
- Scope of delivery 4 винта ( 2 х 10 мм и 2 х 5 мм), 2 пластиковые шайбы и 2 гаечки
- Channel separation 25 дБ
- Dynamic compliance 8 x 10-6 cm/din (100 Hz)
- Channel unbalance 1.5 дБ
- Static compliance 35 х 10-6 см / дин
- Tracking angle 23˚
- Type of needle sharpening Коническая
- Output voltage 5.0 mV
- Cantilever material Алюминий
- Internal resistance 800 Ohms
- Height 17.3 mm
- Mounting type Standard (half-inch)
- Type of plate Stereo
- Needle Type MM
- Housing material Пластик
- Frequency response 20 Гц - 20000 Гц
Dimensional parameters
- Weight 6.4 г
- Pre-Order
- Product Code: ATVM510CB
- ATVM510CB
Reviews (0)
Related Products
Copyright © 2024 SoundsLife.art Partner AudioFeel