4-channel Power Amplifier Monitor Audio IA150-8C

IA150-8C

Pre-Order

Description
Specification

The Monitor Audio Installation Amplifiers are configurable to 1, 2, 3, 4, 5, 6, or 12 channels. The IA150-8C enables up to eight (four stereo pairs) channels of 150 watts of power at four ohms. It’ll fit 1U rack height and, as a member of the Monitor Audio ‘Connect’ division, it employs our Connect IP interface, a web application which can be accessed by any device connected to the internet with a web browser on the same network.

The IP control is via the RJ-45 input, controlling power On/Off, volume, muting, and input source selections. Perfectly prepared for any project, the IA150-8C’s industry standard removable block connectors accept up to 12-gauge (3.5 mm2) cable. Together with the rest of the Installation Amplifier range, the IA150-8C provides the brain as well as the brawn for the mightiest of projects.

This product is now available to use with home theatre design software, The CEDIA Designer.

Specifications

Maximum Input Voltage 2.9 V
Input Sensitivity 100 mV / 1 W, 1140 mV – Full power
Output Impedance (Loop RCA) 600 ohms
Power (W / Channel)|70V N/A
Power (W / Channel)|Bridge (8 ohms) 300 W (4CH)
Sold As Single Unit
Power (W / Channel)|8 ohms 140 W
Channel Number 8 (4 Stereo Pairs)
Power (W / Channel)|4 ohms 150 W
'Connect' IP Control Yes
Fuse Rating 10 A (T10AL ~ 250VAC)
Mains Operating Voltage 100 –120 V @ 60 Hz220 – 240 V @ 50 Hz
Input Impedance 20 K ohms
Total harmonic distortion THD + N at 1 kHz 0.03%
Signal-to-noise ratio (SN:R) -100 dB (20 Hz – 20 kHz)
Frequency response 5 Hz – 50 kHz

Dimensional parameters

Dimensions (Excluding Feet (HxWxD)) 42.4 x 438 x 427 mm (111/16 x 171/4 x 1613/16")
Rack Height 1U
Width (including rack brackets) 482 mm (19")
Weight 16 x 171/16")/4 x 1613/52.8 x 438 x 427 mm (21/7.45 kg (16 lb 6 oz)