Phono head with shell Audio-Technica AT-VM95SH/H
Audio-Technica AT-VM95SH/H is a set of Audio-Technica AT-VM95SH pickup head and Audio-Technica AT-HS6BK cartridge holder (shell).
Audio-Technica AT-VM95SH is a new cartridge with the sharpening of the diamond tip of the Shibata needle. Nude Shibata sharpening is one of the most popular among audiophiles. The Shibata sharpened needle reproduces strong and saturated medium and low frequencies, and also provides a frequency response of up to 25,000 Hz.
Audio-Technica AT-VM95SH is the fifth most expensive and senior pickup head in the new line.
The approximate service life of the AT-VMN95SH needle with Shibata sharpening is about 800 hours.
- The AT-VM95SH features an improved design with a stiffer low-resonance housing
- The newly developed radial damping ring improves the transient response and increases the reproducible frequency range to 25,000 Hz
- The cantilever is made of aluminum tube
- Output voltage 3.5 mV
- Assembled and tested at the Audio-Technica factory in Fukui, Japan
Technical specifications:
- Type: VM
- Mounting Type: 1/2 inch
- Frequency range: 20 - 25 000 Hz
- Channel Separation: 23 dB (1 kHz)
- Output balance of channels: 1.5 dB (1 kHz)
- Output voltage: 3.5mV (1 kHz, 5 cm/sec.)
- Vertical tracking angle: 23
- Downforce: 1.8 - 2.2g (2.0g standard)
- Needle Sharpening Type: Shibata
- Needle Size: 2.7 x 0.26 mil
- Needle holder: Aluminum tube
- Coil resistance 3.3 kOhm (1 kHz)
- Static flexibility: 20 x 10-6 cm/din
- Dynamic flexibility: 10.0 x 10-6 cm/din (100 Hz)
- Recommended load resistance: 47,000 ohms
- Recommended load capacity: 100 - 200 pF
- Weight with shell: 15.5 g
- Dimensions: 21.2 (H) x 21.4 (W) x 62.4 (L) mm
- Replacement needle: AT-VMN95SH
Specifications
- Device Type Phono cartridge
- Recommended load resistance 47 кОм
- Downforce range 1.8 - 2.2 г
- Recommended load capacity 100 - 200 пФ
- Optimal downforce 2.0 г
- Channel separation 23 дБ 1 кГц
- Dynamic compliance 10 x 10 – 6 cm/din (100 Hz)
- Channel unbalance 1.5 дБ 1 кГц
- Static compliance 20 x 10 – 6 см / дин
- Tracking angle 23˚
- Shell weight (for shell pickups) 9.0 г
- Type of needle sharpening Шибата
- Output voltage 3.5 mV (1 kHz, 5 cm/sec)
- Cantilever material Алюминиевая трубка
- Internal resistance 3.3 kOhm (1 kHz)
- Mounting type Standard (half-inch)
- Type of plate Stereo
- Brand name of the sharpening Shibata
- Needle Type MM
- Needle sharpening radius 2.7 x 0.26 мил
- Frequency response 20 Гц - 25 000 Гц
Dimensional parameters
- Weight 6.1 г
- Quantity is limited
- Product Code: ATVM95SHH
- AT-VM95SH/H
Reviews (0)
Related Products
Copyright © 2024 SoundsLife.art Partner AudioFeel