Phono cartridge Audio-Technica AT-VM95SH

Name: Phono cartridge Audio-Technica AT-VM95SH
Brand: https://soundslife.art/en/audio-technica
SKU: ATVM95SH
Price: 259 USD
Availability: InStock

ATVM95SH

Ends

Description
Specification

Audio-Technica AT-VM95SH is a new cartridge with sharpening of the diamond tip of the Shibata needle. Nude Shibata sharpening is one of the most popular among audiophiles. The Shibata sharpened needle reproduces strong and saturated medium and low frequencies, and also provides a frequency response of up to 25,000 Hz.

Audio-Technica AT-VM95SH is the fifth most expensive and senior pickup head in the new line.

The approximate service life of the AT-VMN95SH needle with Shibata sharpening is about 800 hours.

The AT-VM95SH features an improved design with a stiffer low-resonance housing
The newly developed radial damping ring improves the transient response and increases the reproducible frequency range to 25,000 Hz
The cantilever is made of aluminum
Output voltage 3.5 mV
Two threaded inserts in the cartridge housing, allow you to install it on a shell or tonearm with just two screws, without nuts

General information on the Audio-technica AT-VM95 series

The new line of VM95 entry-level Dual Moving Magnet cartridges is designed by Audio-Technica based on the experience of creating pickup heads since 1962. Based on the rich heritage and experience of the company, the new line of six pickup heads of different levels, boasts the same body design to ensure easy replacement of the replacement needle and modernization of the head using a more advanced needle. This series also features a new generation of the AT95E cartridge, developed in Japan 38 years ago, many critics consider it the most successful entry-level cartridge of all time, which has sold more than 5,000,000 copies.

New items are not only affordable, but also convenient to use: they are easy to install and replace, since they are attached with only two screws. Moreover, the nuts are mounted in the housing of the heads and during installation it is enough to simply support the head, and not try to put the nut on a small screw, which sometimes is not easy. The model range includes a VM95C cartridge with conical needle sharpening (replacing AT91, AT91R and CN5625AL), VM95E with elliptical sharpening (replacing AT95E), VM95EN with elliptical NUDE sharpening, VM95ML with a Line Contact Microlinear needle, VM95SH with a Line Contact Shibata needle and VM95SP for old 78-rpm records. Needles can be purchased separately, all of them are suitable for any VM95 series head.

Specifications

Device Type Phono cartridge
Recommended load resistance 47 кОм
Downforce range 1.8 - 2.2 г
Recommended load capacity 100 - 200 пФ
Optimal downforce 2.0 г
Scope of delivery 2 винтика 11 мм, 2 винтика 8 мм, 2 шайбы, немагнитная отвертка
Channel separation 23 дБ 1 кГц
Dynamic compliance 10 x 10 – 6 cm/din (100 Hz)
Channel unbalance 1.5 дБ 1 кГц
Static compliance 20 x 10 – 6 см / дин
Tracking angle 23˚
Type of needle sharpening Шибата
Output voltage 3.5 mV
Cantilever material Алюминий
Internal resistance 3.3 kOhm (1 kHz)
Height 17.2 mm
Mounting type Standard (half-inch)
Type of plate Stereo
Brand name of the sharpening Shibata
Needle Type MM
Needle sharpening radius 2.7 x 0.26 мил
Housing material Пластик ABS
Frequency response 20 Гц - 25 000 Гц