Phono cartridge with shell Audio-Technica AT-VM95EN/H
Audio-Technica AT-VM95EN is a new cartridge with elliptical sharpening of the diamond tip of the needle (Elliptical Nude). Elliptical sharpening improves the quality of reproduction of musical material, especially with regard to the accuracy of high frequencies and transient characteristics.
Audio-Technica AT-VM95EN is the third most expensive pickup head in the new line, but it can be upgraded to the top head at any time by simply replacing the needle. That is, you can always choose another sharpening from the VM95 series: Microlinear or Shibata. Any needle wears out as records are played, which is why it is so important to be able to purchase a replacement needle.
The approximate service life of the AT-VMN95EN elliptical needle is about 300 hours.
- The AT-VM95EN features an improved design with a stiffer low-resonance housing
- The newly developed radial damping ring improves the transient response and increases the reproducible frequency range to 23,000 Hz
- New aluminum tube cantilever
- Output voltage 3.5 mV
- Assembled and tested at the Audio-Technica factory in Fukui, Japan
Technical specifications:
- Type: VM
- Mounting Type: 1/2 inch
- Frequency range: 20 - 23 000 Hz
- Channel Separation: 22 dB (1 kHz)
- Output balance of channels: 2.0 dB (1 kHz)
- Output voltage: 3.5mV (1 kHz, 5 cm/sec.)
- Vertical tracking angle: 23
- Downforce: 1.8 - 2.2g (2.0g standard)
- Needle Sharpening Type: Elliptical
- Needle Size: 0.3 x 0.7 mil
- Needle design: Round shank
- Needle holder: Aluminum tube
- Coil resistance 3.3 kOhm (1 kHz)
- Static flexibility: 20 x 10-6 cm/din
- Dynamic flexibility: 7 x 10-6 cm/din (100 Hz)
- Recommended load resistance: 47,000 ohms
- Recommended load capacity: 100 - 200 pF
- Weight with shell: 15.5 g
- Dimensions: 21.2 (H) x 21.4 (W) x 62.4 (L) mm
- Replacement needle: AT-VMN95EN
Specifications
- Device Type Phono cartridge
- Recommended load resistance 47 com
- Downforce range 1.8 - 2.2 g
- Recommended load capacity 100 - 200 pF
- Optimal downforce 2.0 g
- Channel separation 22 dB (1 kHz)
- Dynamic compliance 7.0 x 10-6 cm/din (100 Hz)
- Channel unbalance 2.0 dB (1 kHz)
- Static compliance 20 x 10 - 6 cm / din
- Tracking angle 23°
- Shell weight (for shell pickups) 9 g
- Type of needle sharpening Elliptical
- Output voltage 3.5 mV (1 kHz, 5 cm/sec)
- Cantilever material Aluminum tube
- Internal resistance 3.3 kOhm (1 kHz)
- Mounting type Standard (half-inch)
- Type of plate Stereo
- Brand name of the sharpening Elliptical
- Needle Type MM
- Needle sharpening radius 0.3 x 0.7 mil
- Frequency response 20 - 23,000 Hz
Dimensional parameters
- Weight 6.1 g
- Quantity is limited
- Product Code: ATVM95ENH
- AT-VM95EN/H
Reviews (0)
Related Products
Copyright © 2024 SoundsLife.art Partner AudioFeel