Phono cartridge with shell Audio-Technica AT-VM95SP/H
Audio-Technica AT-VM95SP is a new cartridge with a conical sharpening of the diamond tip of the needle. The conical profile with a large rounding radius of 3 mil is specially designed for playing old monophonic shellac and 78-rpm vinyl records with a wide groove profile (SP - for "Shellac" or Phonograph records). Since the VM95 series uses the same universal cartridge with different replaceable needles to play mono recordings, it is recommended to use the "MONO ON" function of your preamp or phono corrector, if there is such a function, to reduce noise from the damaged surface of the record. If you use a special archive phono corrector – equalizer, then you have various options for processing the mono signal from the stereo cartridge (Mono L + R, Mono L, Mono R, LR Variable Mix). The presence of several options for obtaining a mono signal allows professional archivers to minimize noise by selecting the least damaged side of the groove of an old recording.
The Audio-Technica AT-VM95SP pickup head can be turned into another VM95 series pickup at any time by simply replacing the needle. That is, you can always choose any other sharpening from the VM95 series: Elliptical, Elliptical nude, Microlinear or Shibata. The approximate service life of the conical needle AT-VMN95SP is about 500 hours.
- The AT-VM95SP features an improved design with a stiffer low-resonance housing
- New aluminum tube cantilever
- Output voltage 2.7 mV
- Assembled and tested at the Audio-Technica factory in Fukui, Japan
Technical specifications:
- Type: VM
- Mounting Type: 1/2 inch
- Frequency range: 20 - 20,000 Hz
- Output voltage: 2.7 mV (1 kHz, 5 cm/sec.)
- Vertical tracking angle: 23
- Downforce: 4.5 - 5.5g (5.0g standard)
- Needle Sharpening Type: Conical
- Needle size: 3 mil
- Needle holder: Aluminum tube
- Coil resistance 3.3 kOhm (1 kHz)
- Static flexibility: 12 x 10 – 6 cm /din
- Dynamic flexibility: 2 x 10 – 6 cm/din (100 Hz)
- Recommended load resistance: 47,000 ohms
- Recommended load capacity: 100 - 200 pF
- Weight with shell: 15.5 g
- Dimensions: 21.2 (H) x 21.4 (W) x 62.4 (L) mm
- Replacement needle: AT-VMN95SP
Specifications
- Device Type Phono cartridge
- Recommended load resistance 47 кОм
- Downforce range 4.5 – 5.5 г
- Recommended load capacity 100 - 200 пФ
- Optimal downforce 5.0 г
- Dynamic compliance 2 x 10 – 6 cm/din (100 Hz)
- Static compliance 12 x 10 – 6 см / дин
- Tracking angle 23°
- Shell weight (for shell pickups) 9 г
- Type of needle sharpening Коническая
- Output voltage 2.7 mV (1 kHz, 5 cm/sec)
- Cantilever material Алюминиевая трубка
- Internal resistance 3.3 kOhm (1 kHz)
- Height 17.2 mm
- Mounting type Standard (half-inch)
- Type of plate 78 rpm, mono
- Brand name of the sharpening Conical SP
- Needle Type MM
- Needle sharpening radius 3 мил
- Housing material Пластик ABS
- Frequency response 20 - 20 000 Гц
Dimensional parameters
- Weight 6.1 г
- Pre-Order
- Product Code: ATVM95SP/H
- ATVM95SP/H
Reviews (0)
Related Products
Copyright © 2024 SoundsLife.art Partner AudioFeel