Phono cartridge Audio-Technica AT-OC9XSH

Name: Phono cartridge Audio-Technica AT-OC9XSH
Brand: https://soundslife.art/en/audio-technica
SKU: AT-OC9XSH
Availability: InStock

AT-OC9XSH

Pre-Order Specify the price

Description
Specification

Audio-Technica AT-OC9XSH is a progressive pickup with a double movable coil.

More than 50 years of experience in the audio industry have allowed Audio-Technica to create AT-OC9X - a series of cartridges in an aluminum case, characterized by perfect channel separation, the purest signal transmission and a truly reliable design. These characteristics were achieved thanks to the use of OCC (single crystal copper) in coils, optimization of their location and the use of a pure iron magnetic core. The Audio-Technica AT-OC9XSH model is equipped with a one-piece needle with Shibata sharpening and is ready for playback right out of the box - the screw mount and the included screws and tools guarantee the fastest and most intuitive installation of the cartridge.

Features of Audio-Technica AT-OC9XSH:

Neodymium magnet and permanent plug

Threaded inserts in the cartridge housing allow you to install the cartridge with just two screws - nuts are not required
Aluminum housing minimizes unwanted vibration
The use of monocrystalline pure copper in Ohno Continuous Casting (PCOCC) coils allows you to get the cleanest possible signal

Specifications

Device Type Phono cartridge
Recommended load resistance 100 Ом
Downforce range 1.8 - 2.2 г
Optimal downforce 2.0 г
Scope of delivery Немагнитная отвертка, 2 шайбы, щёточка для чистки иглы, защитный колпачок, немагнитные винты для установки картриджей (2 х M2.5 х 5 мм, 2 х M2.5 x 8 мм, 2 х M2.5 x 10 мм, 2 х M2.5 x 12 мм)
Channel separation 27 дБ (1 кГц)
Dynamic compliance 16 x 10-6 cm/din (100 Hz)
Channel unbalance 1.0 дБ (1 кГц)
Static compliance 20 x 10-6 см/дин
Tracking angle 20°
Type of needle sharpening Шибата
Output voltage 0.4 mV
Cantilever material Бор-волокно Ø 0.28 мм
Height 17.3 mm
Mounting type Standard (half-inch)
Type of plate Stereo
Brand name of the sharpening Shibata
Needle Type MC
Needle sharpening radius 2.7 x 0.26 mil
Housing material Алюминий
Frequency response 20 Гц - 47 000 Гц