Active Subwoofer Monitor Audio Bronze W10

Bronze_W10

Ends

Description
Specification

The Bronze W10’s long-throw 10" C-CAM subwoofer driver combines with the 10" auxiliary bass radiator to bring a vivid realism to any performance.

Our engineers have acoustically improved the driver and bass radiator by reducing the moving masses and tuning the compliances in the system to improve the transient response - kick drumsand explosions now have much more punch and precision. Reduced moving mass and improved rubber feet allows more energy to be transmitted directly into the room rather than being lost through mechanical vibrations through the floor and walls.

The Bronze W10 is a stunning addition to any room.

This product is now available to use with home theatre design software, The CEDIA Designer.

Key Features

Long-throw 10" (250 mm) driver featuring ‘dished’ C-CAM
10" (250 mm) flat panel Auxiliary Bass Radiator (ABR) positioned underneath the unit
Class D amplifier with high current Switch Mode Power Supply (SMPSU)

Specifications

Amplifier Classification Class D with high current Switch mode power supply (SMPSU)
Automatic detection Line Level >3mV. Auto Standby feature after 20 mins
Amplifier Output 220 W
Linear Driver Excursion 17 mm peak to peak
Low Pass Filter Alignment 4th order (24 dB/Octave), from 50 Hz to 120 Hz
Phase Control 0 Degrees & 180 Degree pure Invert
Upper frequency limit -6 dB @ 150 Hz
Lower Frequency Limit -3 dB @ 33 Hz / -10 dB @ 28 Hz (Free Field) Default preset: Music, -3 dB @ 29 Hz / -10 dB @ 25 Hz (In Room)
Sold As Single Unit
Fuse Type 20 mm T4AL 250 VAC
Audio input/output LFE unbalanced input RCAStereo unbalanced inputs RCA
Power Consumption Maximum 300 W, Standby
System Format Long-throw 10" driver featuring ‘dished’ C-CAM cone. 10" flat panel ABR (Auxiliary Bass Radiator).18 mm M.D.F. internally braced construction
Mains Input Voltage 110 – 120 Vac 50 – 60 Hz / 220 – 240 Vac 50 – 60 Hz (Manually selected)
Electrical Certifications CE / CB / ETL / Fcc / CCC / ErP (Energy saving compliant)
12 V Trigger 3.5 mm mono mini-jack. 6 V threshold
Drive Unit Complement 1 x 250 mm (10") C-CAM subwoofer driver featuring a 2" long throw voice coil
Input Impedance 20 kOhms input impedance
Leveling DSP 3 pre-set modes: Music, Movie, Impact

Dimensional parameters

Weight (without packaging) 13.4 kg (29 lb 9 oz)
External dimensions (including grid and terminals (HxWxD)) 16 x 125/16")/321 x 321 x 364 mm (125/366.5 x 321 x 364 mm (147/8 x 125/8 x 145