Phono cartridge Audio-Technica AT-XP5

Name: Phono cartridge Audio-Technica AT-XP5
Brand: https://soundslife.art/en/audio-technica
SKU: ATXP5
Price: 100 USD
Availability: InStock

ATXP5

Ends

Description
Specification

Audio-Technica AT-XP5 is a pickup with elliptical sharpening designed specifically for DJs.

More than 50 years of experience and undoubted leadership in the production of cartridges have allowed us to create AT-XP — a new line of professional DJ pickups for vinyl players. A high level of output power, a particularly durable case and additional visibility of the needle compared to other models — thanks to all these advantages, any of your set or performance will be held at the highest level and will remain in everyone's memory for a long time.

A downforce of 2 - 4 g, an output power of 5.5 mV and an elliptical needle of 0.3 x 0.7 mm provide an unsurpassed level of reproduction. In addition, thanks to the new design of the cartridge, the visibility area of the needle is increased, which makes its professional use even easier and more pleasant.

AT-XP series cartridges provide high-quality sound for DJs, offering all the functions of a DJ cartridge, but with Hi-Fi sound.

The scope of delivery of the Audio-Technica AT-XP5 pickup head includes two 11 mm screws, two 8 mm screws, two washers, two nuts and a non-magnetic screwdriver.

Audio-Technica AT-XP5 Features:

The case based on fiberglass and thermoplastics provides additional strength and reliability of the cartridge
Excellent visibility of the cartridge needle when used by DJs
Specially selected values of impedance and output power for the best compatibility with professional mixing consoles
The carbon fiber reinforced cantilever and nylon suspension ensure perfectly accurate needle following along the groove of the plate
VM design with two magnets and an elliptical needle 0.3 x 0.7 mil
Fully compatible with AT-XP series replacement needles

Specifications

Device Type Phono cartridge
Recommended load resistance 47 кОм
Downforce range 2.0 - 4.0 г
Recommended load capacity 100 - 200 пФ
Scope of delivery Немагнитные винты для установки картриджей 2 х М2.5 х 11 мм, 2 х М2.5 х 8 мм, две шайбы, две гайки и немагнитная отвёртка
Channel separation 20 дБ (1 кГц)
Dynamic compliance 6.0 x 10-6 cm/din (100 Hz)
Channel unbalance 2.0 дБ (1 кГц)
Static compliance 20 x 10-6 см/дин
Tracking angle 20°
Type of needle sharpening Эллиптическая
Output voltage 5.5 mV (1 kHz, 5 cm/sec)
Cantilever material АБС-пластик, армированный углеродным волокном
Height 17.2 mm
Mounting type Standard (half-inch)
Type of plate Stereo
Brand name of the sharpening Elliptical
Needle Type MM
Needle sharpening radius 0.3 x 0.7 мил
Frequency response 20 - 18 000 Гц