Speaker System Monitor Audio Gold 200

Gold_200

Pre-Order

Description
Specification

A more compact floorstander, the Gold 200 nevertheless delivers full-scale performance. Its three-way design features two 6½" (165 mm) RDT II bass drivers beneath a 2½" (64 mm) C-CAM mid-range driver with a MPD high-frequency transducer module, backed up by dual rear-firing HiVe II ports.

All but the largest rooms will benefit from Gold 200’s remarkably tight and textured bass response, deftly informative mid-range and smooth high-frequency attack. Regardless of volume or your listening position, Gold 200’s powers of communication will move you.

This product is now available to use with home theatre design software, The CEDIA Designer.

Key Features

MPD high-frequency transducer – articulate, extended high frequencies, yet supremely smooth
Dual 6^1/2" bespoke bass drivers, featuring:
- – RDT II Cone technology – specially developed Sandwich cone technology using thin C-CAM, Nomex honeycomb core and woven carbon fibre back skin to return incredible stiffness, yet light and well damped
- – DCF (Dynamic Coupling Filter) – optimised to reduce high frequency cone break-up and further reduce distortion
Dual HiVe II ports – improved transient response and tighter bass, due to smoother air-flow
Pureflow silver-plated OFC copper internal cabling – highest quality transfer through the signal chain
Soft touch top trim – giving a luxurious, premium quality furniture grade touch and appearance
Single-bolt-through driver technology – providing increased bracing strength, rigidity and driver/baffle de-coupling
Bespoke magnetic grilles – clean visual styling, virtually acoustically transparent
Sturdy cast metal out-rigger feet with spike or rubber foot for carpet or hard flooring – provides more attractive appearance and takes up less floor space

Specifications

Crossover Frequency L.F/ M.F: 650 HzM.F/ H.F: 3.5 kHz
Recommended Amplifier Requirements 80 – 200 W
Power Handling (RMS) 200 W
Minimum Impedance 3.4 Ohms @ 1 kHz
Nominal Impedance 4 Ohms
Sold As Pair
System Format 3-way
Frequency response (-6 dB) 35 Hz – 50 kHz
Drive Unit Complement 2 x 61/2" RDT II long-throw bass driver1 x 21/2" C-CAM mid-range driver1 x MPD high-frequency transducer
Maximum SPL 114 dBA (Pair)
Bass Alignment Bass ReflexDual HiVe II port system
Sensitivity (1W@1M) 88 dB

Dimensional parameters

External dimensions (including grid and terminals (HxWxD)) 16 x 13")/4 x 111/4")/8 x 711/8 x 151/950 x 195 x 330.6 mm (373/997 x 282.8 x 387.8 mm (391
Weight (each) 21.86 kg (48 lb 2 oz)